Classroom resources, in accessible HTML
Ages 4–9 · Read, predict, test and reflect.
These HTML alternatives preserve the teacher procedures and activity boundaries in the PDF resources. Student prompts offer typing and dictation alongside printing and drawing. The original PDFs remain available.
Responses stay on this open page: they are not submitted or automatically saved. Print or save as PDF before leaving. For teacher feedback, omit student names and identifying details.
Bridging the Gap — Full teaching guide
Download original PDF · Resource index
The full five-page guide combines the same complete teacher notes and two-page student handout available below. Choose either part to read, complete or print in this page.
No separate procedure is omitted from this bundle.
Bridging the Gap — Teacher notes
Download original PDF · Resource index
Mission: Get the toys across!
Bridging the Gap • Ages 4–9 • 45–60 minutes + reading
Big question
How can we make a bridge across a 15 cm gap that carries five identical toy cars, one at a time? Children plan, build, test, and improve a model; success is evidence-led redesign, not a contest.
Learning intentions
Identify a gap, supports and span; predict before testing; keep a test fair; explain how one design change affected the bridge. Useful words: span, support, load, brace, evidence, redesign.
After the story: talk, sketch, connect
Ask: What problem did the characters notice? Which clue would help us choose a material? When something failed, what could the team learn? Partners sketch a “before” and “after” bridge idea and finish: “A helpful teammate can ___.” Do not require a particular page or memorized wording.
Prepare one team tray
Two stable stacks of books or blocks; ruler; two equal-size pieces of thin cardboard or cardstock (about 20 × 10 cm); 12 paper straws; 30 cm masking tape; 5 identical toy cars; pencils; student handout. Scissors are teacher-managed. Materials are a design budget, not a required recipe.
Set the scene
Use a table, not a floor crossing or elevated walkway. Set supports 15 cm apart with level tops. Mark the gap with tape. The bridge is for toys only. Check for sharp cardboard edges and loose small parts; choose large age-appropriate toys and supervise younger children. Keep loads away from table edges.
Team jobs
Rotate: designer draws; builder handles materials; tester rolls cars; reporter records. In pairs, combine roles and swap after the first test.
Build • Test • Improve
Bridging the Gap • Teacher notes
- Place supports 15 cm apart. Agree that every team will use this gap and the same five cars. Draw a first plan and circle where the supports touch the bridge.
- Build a flat deck first. Use tape to join materials; do not tape the deck to furniture. Predict how many cars will cross without falling.
- Roll ONE car slowly across. Add the next car only after the previous one reaches the far support. Record each successful crossing. Stop if the bridge slips or breaks; do not catch falling toys at an edge.
- Keep the gap and test cars the same. Change ONE feature: fold a side rail, add a triangle brace, or change how a joint is secured. Sketch and label that change.
- Repeat the same slow crossing test and compare. If you change material too, say that more than one feature changed and you cannot tell which change caused the result.
- Hold a bridge gallery walk: “I notice ___; I wonder ___; our evidence is ___.” Celebrate thoughtful redesign even if the bridge does not carry every car.
Suggested timing
Connect to story 8 min; plan 7 min; first build 10 min; test 5 min; redesign 10 min; share 5 min. Spread over two sessions if children need more building time.
Important model distinction
The website uses fictional load scores. A real straw bridge is not guaranteed to fail at two cars, nor cardboard to hold five. Shape, joints, dimensions, support and car mass matter. Use what the classroom bridge actually does as evidence; do not force an expected result.
Teacher thinking tools
Bridging the Gap • Teacher notes
Notice learning, not just the final product
Listen for a prediction, a recorded outcome, and a named design change. Ask: “What stayed the same? What did you notice, rather than guess?” Photograph the first and revised bridges if school permissions allow.
Teacher look-fors / possible answers
Triangle bracing can reduce changes in shape, but weak joints can still fail. Folded cardboard may resist bending better than a flat sheet of the same material. A wider support contact can reduce slipping. Several different solutions are possible.
Extend the adventure
Compare folded and flat versions of the same cardboard. Keep the gap, cars and rolling method unchanged. Link to art: draw a bridge for an imaginary place and label what is decorative versus structural.
Make room for every learner
Ages 4–6: draw, point, act out a prediction, or dictate to an adult; work with a partner. Ages 7–9: label a diagram, record evidence, and explain a change. Offer large-print copies, pre-cut materials and picture choices. Accept oral responses; do not assess handwriting as science understanding.
Exit ticket
“At first I thought ___. My evidence showed ___. Next I would ___.” Invite children to share one kind, helpful thing a teammate did.
Before copying
Print student pages 1–2 single-sided. Set out ruler and pencils. The two designs on the handout are children’s own plans, not templates with a single right answer.
Bridging the Gap — Student handout
Download original PDF · Resource index
Bridging the Gap · Student response sheet. Type, dictate, or print and draw. Prompts follow the original PDF; text responses are an alternative to drawing.
MISSION: Help the toy cars cross! Work with your team to build, test and improve a bridge. Our gap is 15 cm. Roll the same cars slowly, one at a time.
3 / Test and record
Remember: the bridge is for toys, never for people. Ask the teacher before using scissors.
Bridging the Gap — Preparation checklist
Download original PDF · Resource index
Ready for a little discovery?
Bridging the Gap • Teacher preparation checklist
Gather your team tray
Cardstock or thin cardboard; paper straws; masking tape; stable supports; ruler; five identical toy cars.
Your activity
Build across a 15 cm gap. Roll the same cars one at a time; change one design feature and compare.
Local preparation notes
Bridging the Gap — Classroom presentation
Elephant Toothpaste Trouble — Full teaching guide
Download original PDF · Resource index
The full five-page guide combines the same complete teacher notes and two-page student handout available below. Choose either part to read, complete or print in this page.
No separate procedure is omitted from this bundle.
Elephant Toothpaste Trouble — Teacher notes
Download original PDF · Resource index
Mission: Bubble detectives
Elephant Toothpaste Trouble • Ages 4–9 • 30–40 minutes + reading
Big question
What clues show that a change is happening? Use a small teacher-led demonstration. Children predict, observe from a marked viewing area, draw evidence, and revise an explanation.
After the story
Ask: What can we notice when an experiment surprises us? Is a prediction a promise? Partners draw an “I wonder” bubble and suggest one observation the characters could record. Rehearse: “I noticed ___, so now I wonder ___.”
Prepare one demonstration
One clean, empty 500 mL plastic bottle, uncapped; deep spill tray; 120 mL (½ cup) HOUSEHOLD 3% hydrogen peroxide; 15 mL (1 tablespoon) liquid dish soap; 1 tablespoon dry yeast; 45 mL (3 tablespoons) comfortably warm water; separate cup, spoon, funnel and measuring tools. Food coloring is optional; omit it to reduce stains. Do not scale up.
Teacher safety check — before children gather
Follow school chemical-use policy and product safety information; trial the demonstration in advance. Use ONLY labeled 3% peroxide, never stronger peroxide or another catalyst. The adult handles peroxide, mixing, pouring and cleanup. Wear splash goggles, protective gloves and an apron; provide eye protection for observers in the demonstration area. If safe setup or supervision is unavailable, use the virtual lab instead.
Set a clear observation boundary
Keep children back from the tray and bottle opening. Keep the bottle upright and OPEN: never cap, stopper, squeeze or aim it. No touching, tasting or smelling ingredients or foam. It is not toothpaste. Reaction liquid and foam may be warm and may contain peroxide. Keep away from eyes, skin, clothing and food; avoid yeast dust. Check relevant allergies and access needs.
Teacher-led demonstration
Elephant Toothpaste Trouble • Teacher notes
- Place the uncapped bottle upright in the tray. Show the student handout and ask for a drawing prediction before you mix anything.
- Adult: measure 120 mL of 3% peroxide into the bottle, add 15 mL dish soap, and gently swirl without closing the bottle. Optional coloring is not needed for the science.
- In a separate cup, stir 1 tablespoon dry yeast into 45 mL comfortably warm—not hot—water to make an even mixture. Keep all materials at the adult bench.
- Adult: pour the yeast mixture into the open bottle and step back. Do not lean over the opening. Children watch for new bubbles, changes in foam height and overflow into the tray.
- At about 0, 30 and 60 seconds, invite students to draw or describe what they see. Timing is approximate; results vary. Do not ask students to touch the bottle to test warmth.
- After observation, the adult lets the mixture cool and manages disposal under product directions and local school rules. Keep the vessel open while it reacts. Wash equipment and hands, wipe the area, and store unused peroxide securely in its original labeled container.
If the reaction is small
Do not increase concentration or quantities to make a bigger show. Treat a small result as data. Check the label, freshness of yeast/peroxide, water temperature and measuring steps before a later teacher trial. Do not invite children to troubleshoot by handling chemicals.
If a splash occurs
Follow the product first-aid instructions and school response procedure immediately. Rinse exposed skin with water; for eye exposure, begin continuous water irrigation and obtain appropriate medical/poison-control advice. Keep the product label available.
Explain the evidence
Elephant Toothpaste Trouble • Teacher notes
Notice learning, not just the final product
Look for a prediction separated from an observation, and a statement supported by a visible clue. “I saw bubbles increase” is evidence; “it was magic” is a starting idea to investigate.
Teacher look-fors / possible answers
Catalase, an enzyme in yeast, speeds hydrogen peroxide breaking down into water and oxygen gas. Soap traps oxygen in bubbles. The reaction releases heat. Yeast does not simply make this foam rise as it does bread, and soap does not create the oxygen. Foam height alone does not measure how much gas was made.
Extend the adventure
Use the virtual lab to omit soap or yeast without a second classroom chemical trial. Keep drawings beside a three-role chart: peroxide supplies reaction material; yeast contains the catalyst; soap traps gas. Older students can explain why a prediction may differ from evidence.
Make room for every learner
Ages 4–6: draw, point, act out a prediction, or dictate to an adult; work with a partner. Ages 7–9: label a diagram, record evidence, and explain a change. Offer large-print copies, pre-cut materials and picture choices. Accept oral responses; do not assess handwriting as science understanding.
Exit ticket
“At first I thought ___. My evidence showed ___. Next I would ___.” Invite children to share one kind, helpful thing a teammate did.
Sources for the adult procedure
Quantities and sequence adapted from USDA ARS AgLab, “Elephant Toothpaste.” Classroom role restrictions and observation sheet are Emcee teaching adaptations. Consult the product label and school policy for your setting.
USDA ARS: https://aglab.ars.usda.gov/let-s-get-to-work/elephant-toothpaste
Chemistry cross-check: American Chemical Society, Chicago Section, “Elephant Toothpaste” (2024): https://chicagoacs.org/articles/456
Elephant Toothpaste Trouble — Student handout
Download original PDF · Resource index
Elephant Toothpaste Trouble · Student response sheet. Type, dictate, or print and draw. Prompts follow the original PDF; text responses are an alternative to drawing.
MISSION: Watch like a scientist. Your teacher does the mixing. You predict, notice and draw. Keep hands away from the bottle and foam; it is NOT toothpaste.
My noticing words: slowly • quickly • more • less • same • different
3 / Our observation timeline
Tell a partner: “I saw ___. Now I wonder ___.” Yeast helps release gas; soap catches gas in bubbles. Your teacher manages cleanup.
Elephant Toothpaste Trouble — Preparation checklist
Download original PDF · Resource index
Ready for a little discovery?
Elephant Toothpaste Trouble • Teacher preparation checklist
Gather your team tray
Adult bench: household 3% peroxide; yeast; dish soap; warm water; open 500 mL plastic bottle; spill tray; measuring tools; splash goggles and protective equipment. Read teacher procedure.
Your activity
Teacher performs the demonstration. Students predict, watch from a marked area, and record changes without handling chemicals or foam.
Local preparation notes
Elephant Toothpaste Trouble — Classroom presentation
Fixing Sparx — Full teaching guide
Download original PDF · Resource index
The full five-page guide combines the same complete teacher notes and two-page student handout available below. Choose either part to read, complete or print in this page.
No separate procedure is omitted from this bundle.
Fixing Sparx — Teacher notes
Download original PDF · Resource index
Mission: Sparx needs a detective
Fixing Sparx • Ages 4–9 • 35–45 minutes + reading
Big question
How can we find a problem without changing everything at once? Children inspect a pretend robot panel, use a rule card, make one repair, and retest. This is a paper model of troubleshooting, not real electronics repair.
After the story
Ask: What clue would you check first when Sparx stops working? What is the difference between looking carefully and guessing? Partners retell a problem–clue–try–result sequence using four quick pictures. Invite several sensible starting checks.
Prepare one pair kit
Student pages 1–2; pencil and four coloring tools; four thick pieces of yarn or reusable paper strips; tape; one paper ON/OFF card. No batteries, electrical wires, tools, motors, magnets or opened devices are needed. Use large pieces for younger pupils; teacher cuts optional cards.
Our pretend-panel rule card
A red circle lead belongs to port 1 (red circle). A blue square lead belongs to port 2 (blue square). A green triangle lead belongs to port 3 (green triangle). A yellow star lead belongs to port 4 (yellow star). Each lead uses its own port. The paper power card must say ON. These are fictional game rules, not rules for real wire colors.
Teacher sets the starting fault
Use one of the fault missions on the next page. Describe or draw its starting connections on a separate copy; keep the answer covered. Partners alternate detective and recorder. A child can point or place yarn rather than draw.
Classroom boundaries
Never open Sparx-like toys or real devices for this activity. Do not use wall sockets, mains cables, loose batteries or button cells. Paper switches are symbolic. Loose yarn stays on the table and is not tied around bodies. Stop if materials create an access or small-parts risk.
Find • Fix • Test
Fixing Sparx • Teacher notes
- Read the rule card together. Name both shape and color; color alone is not needed to solve the challenge. Predict one possible cause before making a repair.
- Inspect the teacher’s starting panel. Trace one lead with a finger or pencil. Compare its destination to the rule card.
- Record a clue: “I can see ___.” Choose ONE connection or the paper power card to change. Explain why that change is a sensible next test.
- Make the change and retest against ALL five checks: four matching connections plus power ON. Say “ready” only when every check passes.
- If the check fails, record what it tells you and try one new change. A failed test narrows the problem; it is not a personal failure.
- Swap roles and try a new fault mission. End by teaching another pair your troubleshooting steps without revealing their answer.
Fault mission cards — teacher may read aloud
A / MIXED UP: red circle goes to port 2, blue square to port 1, green triangle to port 3, yellow star to port 4. Power is ON. Fix one lead, test, then fix the other.
B / MISSING LINK: red to port 1, blue to port 2, green disconnected, yellow to port 4. Power is ON. The loose end is a clue; do not change correct connections.
C / SLEEPY SPARX: all four leads match their own ports. The paper power card says OFF. Inspect the whole system before changing wires.
Suggested timing
Story discussion 7 min; rule practice 5 min; first mission 10 min; swap and retry 10 min; share evidence 5 min.
Teacher look-fors & answers
Fixing Sparx • Teacher notes
Notice learning, not just the final product
Notice whether a child traces a lead, names a mismatch or missing link, tests all the rules, and changes one thing at a time. A correct final picture without an explanation is a chance to ask for evidence.
Teacher look-fors / possible answers
Mission A: red→1 and blue→2; both need correction. After correcting one, the test still fails because the second is wrong. Mission B: reconnect green→3. Mission C: turn the PAPER card to ON. The student puzzle on page 1 starts blank so students can draw the correct final system.
Extend the adventure
Use the virtual Fix Sparx lab to inspect the chest panel and apply the same matching method. Then transfer the habit to a non-electrical problem: a marker with its cap on, missing puzzle piece, or blocked toy-car path. Ask how the evidence changes the next test.
Make room for every learner
Ages 4–6: draw, point, act out a prediction, or dictate to an adult; work with a partner. Ages 7–9: label a diagram, record evidence, and explain a change. Offer large-print copies, pre-cut materials and picture choices. Accept oral responses; do not assess handwriting as science understanding.
Exit ticket
“At first I thought ___. My evidence showed ___. Next I would ___.” Invite children to share one kind, helpful thing a teammate did.
Language that keeps the team curious
Try “What does this clue tell us?” and “Which one change will we test?” Avoid “You broke it” or “That was easy.” Celebrate careful checking, communication and revision.
Fixing Sparx — Student handout
Download original PDF · Resource index
Fixing Sparx · Student response sheet. Type, dictate, or print and draw. Prompts follow the original PDF; text responses are an alternative to drawing.
MISSION: Draw a lead to its matching port. Use the shape and number as well as color. Then make a PAPER power card that says ON. This is a pretend robot, not real wiring.
My Sparx control panel
In the print sheet you draw the leads. Here you can choose the destination for each lead. The same fictional rule card applies.
- Red circle → port 1, circle
- Blue square → port 2, square
- Green triangle → port 3, triangle
- Yellow star → port 4, star
My troubleshooting log
Finish together: Look closely → choose one change → test → use the result.
Fixing Sparx — Preparation checklist
Download original PDF · Resource index
Ready for a little discovery?
Fixing Sparx • Teacher preparation checklist
Gather your team tray
Printed handouts; pencils; four coloring tools; thick yarn or paper strips; paper ON/OFF card. No real electronics.
Your activity
Check one connection at a time against the color, shape and number rule card.
Local preparation notes
Fixing Sparx — Classroom presentation
Teacher pilot feedback
Download original PDF · Resource index
Help us make the next lesson better. Optional pilot feedback. Please omit student names or identifying details.
This sheet does not send feedback. Print or save your completed response for your own records or to share separately.
